When you have a website or perhaps an application, pace is critical. The swifter your website works and then the swifter your web applications perform, the better for everyone. Since a web site is just a selection of files that connect with one another, the systems that store and work with these data files have an important role in site efficiency.

Hard drives, or HDDs, were, until the past few years, the most dependable systems for storing data. However, in recent times solid–state drives, or SSDs, are already gaining interest. Check out our evaluation chart to determine if HDDs or SSDs are more effective for you.

1. Access Time

Image

With the arrival of SSD drives, data accessibility speeds are now tremendous. Due to the unique electronic interfaces found in SSD drives, the standard data access time has been reduced into a all–time low of 0.1millisecond.

Image

HDD drives even now make use of the same general data access concept that’s actually developed in the 1950s. Despite the fact that it was substantially improved since then, it’s sluggish compared to what SSDs are offering to you. HDD drives’ data access rate can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is important for the efficiency of a data file storage device. We’ve carried out substantial trials and have determined that an SSD can handle a minimum of 6000 IO’s per second.

Image

With a HDD drive, the I/O performance gradually raises the more you use the disk drive. However, in the past it actually reaches a certain limitation, it can’t go quicker. And due to the now–old technology, that I/O limitation is a lot less than what you could get having an SSD.

HDD are only able to go as far as 400 IO’s per second.

3. Reliability

Image

The absence of moving components and rotating disks inside SSD drives, and also the latest developments in electrical interface technology have resulted in a considerably safer data file storage device, having a common failure rate of 0.5%.

Image

Since we have documented, HDD drives rely on rotating disks. And anything that makes use of a number of moving elements for extended amounts of time is more likely to failure.

HDD drives’ regular rate of failure varies among 2% and 5%.

4. Energy Conservation

Image

SSDs don’t have moving elements and require very little cooling energy. They also require very little power to operate – tests have demostrated that they can be powered by a regular AA battery.

In general, SSDs take in between 2 and 5 watts.

Image

HDD drives are famous for staying noisy. They want extra electrical power for cooling down applications. Within a web server containing a large number of HDDs running continually, you’ll need a good deal of fans to ensure that they’re cool – this may cause them far less energy–economical than SSD drives.

HDDs take in between 6 and 15 watts.

5. CPU Power

Image

SSD drives support better file access speeds, which, in return, permit the processor to complete file requests much faster and after that to go back to additional jobs.

The common I/O wait for SSD drives is exactly 1%.

Image

If you use an HDD, you must spend extra time waiting for the outcomes of one’s data file call. As a result the CPU will be idle for more time, expecting the HDD to respond.

The regular I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

It is time for a few real–world examples. We, at PandaDragon Hosting, ran a full system backup on a web server using only SSDs for file storage reasons. In that procedure, the average service time for an I/O demand stayed below 20 ms.

Image

Throughout the identical lab tests with the same web server, this time installed out with HDDs, general performance was noticeably sluggish. Throughout the web server backup procedure, the standard service time for any I/O calls ranged between 400 and 500 ms.

7. Backup Rates

Image

Referring to backups and SSDs – we have found a great advancement in the backup rate as we switched to SSDs. Currently, a usual server backup can take merely 6 hours.

Image

Over time, we’ve worked with primarily HDD drives on our servers and we’re well aware of their effectiveness. With a server furnished with HDD drives, an entire hosting server backup typically takes about 20 to 24 hours.

The VPS plans as well as our typical Linux cloud website hosting accounts offer SSD drives automatically. Be a part of our family here, at PandaDragon Hosting, and discover how we just might help you boost your website.

  • Service guarantees

  •  
  • All of our Virtual Private Servers come with no installation fees and operate in a steady network offering 99.9% of uptime. Full root server access privileges warranted.

  • Compare our prices

  •  
  • Quickly examine the parameters and features supplied by PandaDragon Hosting’s Virtual Private Servers. Find which VPS configuration provides you with just what you need to manage your multi–media online presence comfortably.
  • Compare our hosting plans

  • Contact Us

  •  
  • We are available for you 24 hours to reply to all questions in relation to our VPS services. 1–hour reply–back time frame warranty.